The Harlequin HeatStream brings a revolution in Hot Water Storage. A Heat Storage Tank which produces Mains Pressurised Hot Water without all the drawbacks of traditional Vented. Unvented Hot Water Storage Cylinders or Thermal Stores.
The Indirect range come in 3 sizes, 150, 200 and 250.
MORE INFORMATION – 200 Indirect
Endurance - Heat transfer fluid is enclosed within the most suitable material, long lasting non corrosive heat durable polypropylene. This also makes the system tough and robust reducing the impact of shipping and storage mishaps.
Design - A more convenient square footprint shape, especially where space isa premium. All systems can fit easily through a standard door width. More hot water storage potential within a smaller footprint.
Versatility - The range is compatible with electric, oil, gas, solar thermal heat sources.
An extremely easy and safe installation!
Simply fix the connections conveniently located at the top of the tank, fix the overflow, fill the tank, connect the immersion heater and temperature thermostat through an easily accessible housing and move onto the next job.
Safe, quick and easy installation
25 Year Warranty, peace of mind for a generation (terms and conditions apply)
Low heat loss due to high levels of insulation
No pressure test certification required to install the system
System shape can fit neatly into many locations and through a standard door width
Easy installation of a secondary return system
Tough and durable plastic casing reducing impact of shipping and storage mishaps
Non-corrosive polypropylene storage tank
Top positioned premium Boost Immersion for ultra fast heat up
Variable thermostatic mixing valve which can prevent water exceeding 45°C at outlets
Immersion & thermostats protected behind durable protective covers
|HS 200 Indirect|
|Height + Fittings:||1,650mm|
|Standing Heat Loss:||52W|
|Heat up time 60°C:(test start temperature 15°C.)||24mins|
|Heat up time 65°C:(test start temperature 15°C.)||33mins|
|Heat up time 70°C:(test start temperature 15°C.)||42mins|
|Internal Coils||Stainless Steel|
|Immersion Heater||1x Top Mounted 3kw Immersion Heater|
|Hot Water Coil Inlet/Outlet Connections||22MM Pipe Tail|
|Coil 1 Inlet/Outlet Connections||22MM Compression|
|Hot Water Coil Operating Pressure (max.)||3 bar|
|Coil 1 Operating Pressure (max.)||3 bar|
|Insulation, Sides & Bottom||60mm|
|Warranty||25 year tank body, 2 year internal components|
|Draw Off Volumes|
|60°C Core Temperature||188L|
|65°C Core Temperature||228L|
|70°C Core Temperature||281L|
|15 litres per minute flowrate & usable hot water above 40°C .|